[T2] someone please take photo of coil

[T2] someone please take photo of coil

accessys at smart.net accessys at smart.net
Sat May 30 08:16:42 MST 2015


power comes direct as fan is removed and reverse comes from the shifer in 
an automatic.

have Crane but am getting fire at correct times.

suspect that "White" wire the FI trigger is what I am not getting....???

also on plus side is Fuel tank relay and running lights but they are 
working correctly

isn't there a "White" wire from the ECU?? or is that the one you are 
talking about??

Bob


On Sat, 30 May 2015, Jamie wrote:

> Date: Sat, 30 May 2015 10:48:52 -0400
> From: Jamie <jrivers at globalserve.net>
> To: accessys at smart.net
> Cc: type2 at type2.com
> Subject: Re: [T2] someone please take photo of coil
> 
> The coil
>
> + 15 terminal
> black wire power to the coil ,, comes from the fan relay on ceiling of engine 
> bay
> black wire to reverse light fuse holder wire ... as that is power to the 
> double relay
>
> - 1 terminal
> the green points wire
> the white wire for the ECU trigger
>
> 4 teminal,, is the high tension lead to the distributor cap..
> also.. you need the ROTOR in the distributor... under the cap..
> and you need the condensor grounded
>
> if you have any other wires.... let me know..
>
> of course.. you probably have pertronix ignition...
> so,, instead of the green points wire to the -1 terminal,, and condensor
> you will have a black wire there.. terminal 1
> and the red wire to the 15 terminal
>
> ----- Original Message ----- From: <accessys at smart.net>
> To: <>
> Sent: Saturday, May 30, 2015 10:35 AM
> Subject: [T2] someone please take photo of coil
>
>
>> 
>> could someone take a photo of wires attached to coil.
>> preferably a 78
>> 
>> somewhere somehow a wire is not in the right place.  get everything 
>> working but FI are not triggering.  (test light doesn't flicker)  am to 
>> the bottom of page 11 of the trouble shooting manual and basically says 
>> replace ECU (which I did with a known working spare)
>> 
>> can't find a pin code for the big ECU connector. says check voltages 
>> between #X & #y but which is code the book is confusing.
>> 
>> ready to sell this dang thing for what I just pumped into it. almost 
>> 3grand and it won't start.....
>> 
>> gotta be one little  thing, but which one little thing...
>> 
>> thanks
>> Bob
>> 
>> 
>> _______________________________________________
>> type2 mailing list
>> type2 at type2.com
>> https://www.type2.com/lists/type2/listinfo
>> 
>




More information about the type2 mailing list