[T2] Mustache bar spacers?

[Al Brase]

Does anybody have a link to the original parts book pages? I've got to put
my 1970 back together soon and facing a similar situation: Had a rigged up
mount in place when I bought it. Now I have a genuine mustache bar....

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Tue, Jan 16, 2018 at 5:54 PM, Dave Gillingham <dave at coronado-realty.com>
wrote:

> Thanks!  When I align the mustache bar to the case, there is a welded on
> spacer for the lower 8mm bolt.  That sets the upper 10mm bolts away from
> the threaded bolt hole by nearly 2”??  I found a reference that says the
> correct bolt size for the lower bolt is 8 x 55mm, and the uppers is 10 x
> 70mm.  Seems like there must be some spacers?
>
>
> Dave Gillingham
> Owner/Broker
> Coronado Island Realty
> Office: 619-435-0145
> Mobile: 619-992-5318
>
>
>
> From: Erik Burtis <ewdb92 at gmail.com>
> Date: Tuesday, January 16, 2018 at 3:51 PM
> To: Dave Gillingham <dave at coronado-realty.com>
> Cc: Type2 <type2 at type2.com>
> Subject: Re: [T2] Mustache bar spacers?
>
> Are you talking about the rubber mounts?  These:http://vwparts.
> aircooled.net/Rear-Engine-Mount-1968-71-Type-2-211-199-
> 231A-p/211-199-231a.htm
> Otherwise, I just have washers under the lower bolts and split washers
> under the top nuts.
> Erik
> 71 Westy
>
> On Tue, Jan 16, 2018 at 5:58 PM, Dave Gillingham <dave at coronado-realty.com
> <mailto:dave at coronado-realty.com>> wrote:
> All:
>
> First, I apologize that the system has decided I am a hacker or spammer.
> Not sure what that is about.  I been a list member for a long time.  Please
> ignore the warnings.
>
> My question regards the mustache bar for my 71 Westy.  At long last I am
> sneaking up on reinstalling the engine.  I found out the bolt sizes in the
> archives, but it looks to me (and I vaguely recall) that there are some
> spacers.  Can anybody help me with where to find them, or what size they
> are if I have to make my own?
>
> Thanks
>
> Dave Gillingham
> Coronado, CA
> 73 Panel
> 71 Westy
>
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com<mailto:type2 at type2.com>
> https://www.type2.com/lists/type2/listinfo
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo
>