[T2] Valve cover gaskets

[John Sheldon]

I had the same problem.  Found several type2 posts in webmail spam at AOL (for Verizon)

Sent from my iPad

> On Jul 13, 2017, at 3:12 PM, MUTS <muts at verizon.net> wrote:
> 
> Since being forced to switch to AOL while keeping verizon.net email it's been strange- my posts from original computer come through, but not on newer upstairs one.  I responded to VC gasket issues-one is that to keep it from shifting when installing cover, I use grease if gasket fits well, but some don't want to lay flat and bow in the middle, then I use contact cement on very clean cover. Grease the part where the bale rubs on so it slides up without pulling up cover that you are pushing on. I use a small cat's paw crowbar to slide it up. I also have a 3/4" thick piece of wood thinned on one edge (belt sander) to hold between the cover and panel above, handy for some gaskets that are thick and could let cover displace.
> MUTS  = Michael's Ultimate Thumb Saver oboe, clarinet support
> 93 Chevy Roadtrek 210P
> 78 VW Westfalia Camper
> 
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo