[T2] Steering wheel puller

[Bob Pratt]

It's a 71 bay. I don't know if the PO has ever had it off before. I'm trying to replace the turn signal switch.

Thank you all for the suggestions.

Bob Pratt

> On Jan 10, 2016, at 11:51 PM, Jamie <jrivers at globalserve.net> wrote:
> 
> early bay have a taper spline,, very difficult to get apart without force.
> late bay are straight,, and will probably come loose once the nut is off..
> 
> there is no bolt holding a bay steering wheel on.. and if you are doing a late bay,, leave the nut on loose when wacking from underneath so you don't get the steering wheel in the nose. lol
> 
> ----- Original Message ----- From:Bob To: "Bob
> Cc: <type2 at type2.com>
> Subject: Re: [T2] Steering wheel puller
> 
> 
>> 
>> have never needed one,.
>> remove bolt holding it and hit with hands under steering wheel
>> work your way around the wheel.
>> 
>> should come off fairly easily
>