[T2] Getting the Engine and Transaxle Together: What's the Trick?

[Gregory Urban]

Yes, it is important that the transaxle be at the proper angle fore/aft
when reassembling.

I always support the transaxle when pulling the engine. so that it will
remain in its original position making reconnecting the engine easier.

Greg U

1968 Kombi
2003 Eurovan Sunstar

On Sun, Jan 18, 2015 at 2:18 PM, John Rogers <arathorn.rogers at gmail.com>
wrote:

> Hi Roger,
>
> What I find helpful once everything is lined up properly, which means the
> bell housing and engine surfaces are parallel top to bottom as well as the
> bottom engine bolts and tranny spline line up, is wiggling the engine left
> and right as it is pushed forward rather than just pushing straight ahead.
>