[T2] Sat and the bus in Baltimore, little bit of progress

[accessys at smart.net]

too small, have gotten 3/4 hose (19.1mm) and I just barely can't get it to 
go on.

thanks

Bob


On Fri, 11 Dec 2015, Andy McKinley wrote:

> Date: Fri, 11 Dec 2015 09:38:37 -0800
> From: Andy McKinley <airhedz at gmail.com>
> To: Jamie <jrivers at globalserve.net>
> Cc: Bob carroll <accessys at smart.net>, "type2 at type2.com" <type2 at type2.com>
> Subject: Re: [T2] Sat and the bus in Baltimore, little bit of progress
> 
> Garbage disposal discharge hose at your local good hardware store. It's
> 5/8". Get extra length and loop it long to keep it from kinking. Cut to
> fit.
>
> Andy McKinley
> Alameda, CA
> '79 Cali Kombi sunroof
>
> On Friday, December 11, 2015, Jamie <jrivers at globalserve.net> wrote:
>
>> From: "david raistrick"  To: "Bob carroll" <accessys at smart.net>
>>
>>  napa or a truck part house would be
>>> my best thought.   if it's short, ~3/4 heater hose might do in a
>>> pinch, even though it might collapse a bit...
>>>
>>
>>
>> From: <accessys at smart.net>
>>
>> several days of searching and have not found one on-line.  anyone know who
>>> might have the hose.
>>>
>>
>> several days?? !!  man! ,, i am still on rural dial up service,lol,,  I
>> hit google for " 3/4" vacuum hose line "
>> results ,, About 1,040,000 results (0.34 seconds)
>>
>> if you must order online.. here is one I found in POINT 34 seconds!!!
>> <eyes wide open speed>
>> http://www.hiperformancestore.com/hosebyfoot.htm
>>
>> but locally,,  Tractor Supply Company stores carry assortments... as do
>> farm dealers,  etc..
>> we have hydralic hose supply places that have everything hose..
>> and I would guess that some car dealers,, or hot rod shops have brake
>> booster line that might suffice..
>>
>> hint , if you can't find a vac line per se ... try a rubber hose.... if it
>> does collapes... fit a spring inside to allow it to bend, and not collapse..
>> after a small fire.. I was offered a clear tube from an aquarium supply, a
>> fellow camper just happened to be transporting.. it was sort of less
>> flexible, and thin walled,, but it fit the ends well,, and I had a smaller
>> hose that fit inside to keep it from kinking
>>
>> if the hose kinks when bent in a short tight bend... use 3ft and route it
>> halfway around the engine compartment in a loop..
>>
>> _______________________________________________
>> type2 mailing list
>> type2 at type2.com
>> https://www.type2.com/lists/type2/listinfo
>
>
>
> --
> Andy McKinley
> airhedz at gmail.com
>
> Love your country, but never trust its government.
> -- Robert A. Heinlein.
>