[T2] gremlins .... long.....

[Jamie]

this message, as soooo many others on this list, is coincidental to my 
needs..
I just did a starter maintenance and found the starter armature was hitting 
the poles... dragging,, drawing a lot more current than necessary,, and 
seemed like a slow hot start ruuuh ruuuh ruuuuh start...
I put in a new starter,, and now it spins very fast! ... of course while I 
was doing that,, I cleaned up the gounds and all the wires at the starter...

but recently , driving to NC... the headlights seemed to blink 
brighter....???  seems weird for them both to get brighter.. but turns out 
the big red wire from the key is having a bad connection,, and occasionally 
makes good... for an instant.. on, off,, on..
that is my project sooonn.... probably replace headlight switch as it was 
hot.., and clean up wires there..

----- Original Message ----- 
> then find the big RED?WHITE wire that feeds the fuse panel.. __/__fill in 
> voltage reading here
> then the other end of the big red wire on term 50 at the starter... 
> __/__fill in voltage reading here
> note,,
> **take a reading with key off... then key in start position
>