[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T2] Re: DP to SP conversion



In a message dated 10/1/01 11:00:06 PM Pacific Daylight Time, 
glyle@xxxxxxxxxxxxx writes:

<< The dual port upright continued in non-us baywindows and vanagons for 
quite a while.  I don't feel that they lack any low end over the single port 
engines, but my experience with single ports is limited.. >>

Bentley lists both the 1600 dual port and single port engine at 81.7 ft lb 
torque.

If you_really_want torque in a bus, install a 2 liter GD/GE engine, listed at 
101 ft lb.

mark fitzsimons 
mfitzsim@xxxxxxx
Portland, OR