[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T2] DP to SP conversion

To: <Nurofiz@xxxxxxx>
Subject: Re: [T2] DP to SP conversion
From: George Lyle <glyle@xxxxxxxxxxxxx>
Date: Mon, 1 Oct 2001 13:43:57 -0400 (EDT)
Cc: <type2@xxxxxxxxx>, <docric@xxxxxxxxxxxxx>
Delivered-to: mailing list type2@xxxxxxxxx
In-reply-to: <118.571715d.28e9c8d5@aol.com>
Mailing-list: contact type2-help@xxxxxxxxx; run by ezmlm

On Mon, 1 Oct 2001 Nurofiz@xxxxxxx wrote:

> Ric,
>
> I have a coupla extra manifolds.  If you have a DP center section with good
> heat risers, you can buy SP end "castings" (they're not really cast, and the
> fit isn't all that good - AMHIK).

Talk about the worst of both worlds!  No way I'd want to put dual port
seals on a single port conversion.  Those seals are one of my worst
headaches!

Get the proper manifold and be happy!

George Lyle

References:
- DP to SP conversion
  - From: Nurofiz

Prev by Date: Re: [T2] Heat riser Plugged SP conversion
Next by Date: Re: DP to SP conversion
Previous by thread: DP to SP conversion
Next by thread: Re: DP to SP conversion
Index(es):
- Date
- Thread