Re: [T2] can it be done?

[George Lyle <glyle@xxxxxxxxxxxxx>]

You're right!  I wasn't thinking straight on the cam.  For my students'
sake I had better grade this stack of AP Physics tests while my brain's
still jello!  :)

On Sat, 15 Sep 2001, al brase wrote:

> George:
> Actually, if the cam is 180 degrees out, by turning the crank 360 degrees,
> the cam will be in the right place.
> I would agree that the problem is the distributor drive.
> I would agree completely with your remedy.
> the engine would NEVER have run if the cam and crank were off by more than a
> tooth and then, it would not run well.
> Al Brase
> 69 double cab, 80 westy
>
> George Lyle wrote:
>
> >
> > On to your problem.  I suppose that it would be theoretially possible to
> > have the cam 180 degrees out, but it is much more likely that the
> > distributor drive is 180 degrees out.
>
>