[T2] oil pressure light was Re: Vacuum advance
doktortim at rockisland.com doktortim at rockisland.comThu Oct 13 10:11:46 PDT 2016
- Previous message: [T2] oil pressure light was Re: Vacuum advance
- Next message: [T2] oil pressure light was Re: Vacuum advance
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Test the switch. Use a small pin to push inside the whole while watching for zero ohms/inf. resitance = on/off. new switches can be bad out of the box, so VERIFY function. Bulb is good? Check the bulb holder for ground and volts. > The wire is new and has been tested for conductivity, the switch is new, > and the bulb has been tested. Thanks for the comment! > > Bob > >> On Oct 12, 2016, at 1:07 PM, doktortim at rockisland.com wrote: >> >> Bad Switch or wire broken or bulb issue. >> >>> The oil light never comes on. >>> >>> Bob >>> >>>> On Oct 11, 2016, at 8:26 PM, Jamie <jrivers at globalserve.net> wrote: >>>> >>>> ----- Original Message ----- From: "Bob Pratt" <ka1dza at verizon.net> >>>> >>>> >>>>> I'm wondering if the outlet from the oil filter to the oil pressure >>>>> switch is plugged and keeping the oil pressure light from coming on. >>>> >>>> >>>> my thoughts on that comment.... if the outlet of the filter was >>>> plugged.. there would be NO pressure... and the oil pressure light >>>> should stay OFF... >>>> the oil pump pushes oil into the filter, thru the filter, out of the >>>> filter , past the pressure switch, into the engine galleys ... >>>> so.. if the oil isn't getting past the filter.. then there is no >>>> pressure,, and the switch would be closed,, and the light should be >>>> on... >>>> and the engine should make a weird noise like there is no oil in >>>> there.. >>>> >>>> that said. if I am confoooosed! lol.... some pump bodies do have a >>>> PLUG >>>> in the outlet of the pump....... and then a hole in the cover.. and >>>> the >>>> oil goes out thru the cover into the filter.. etc >>>> if that filter isn't there.. and a blank cover is installed....... the >>>> oil WILL NOT go thru the galley... and the oil pressure switch would >>>> stay closed.. and the light should be on.... >>>> and the engine should make a weird noise like there is no oil in >>>> there.. >>> >>> _______________________________________________ >>> type2 mailing list >>> type2 at type2.com >>> https://www.type2.com/lists/type2/listinfo >> >> >> _______________________________________________ >> type2 mailing list >> type2 at type2.com >> https://www.type2.com/lists/type2/listinfo > >
- Previous message: [T2] oil pressure light was Re: Vacuum advance
- Next message: [T2] oil pressure light was Re: Vacuum advance
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the type2 mailing list