[T2] still no start.

[accessys at smart.net]

double checked wires  1,4,3,2 still right?

guess the twist the dizzy is next I actually started to do that but 
checked the static timing first and didn't do that.  probably next.

thanks
Bob


On Wed, 27 May 2015, Sami Dakhlia wrote:

> Date: Wed, 27 May 2015 17:58:02 +0200
> From: Sami Dakhlia <sami.dakhlia at gmail.com>
> To: Bob carroll <accessys at smart.net>
> Cc: Type2.com <type2 at type2.com>
> Subject: Re: [T2] still no start.
> 
> Wires in the proper firing order? Otherwise, keep adjusting timing:
> twist your distributor just a tad and keep trying. And crank the
> engine a bit longer.
>
> Sami
>
> On Wed, May 27, 2015 at 5:49 PM,  <accessys at smart.net> wrote:
>>
>> mumble mumbel mumble.
>>
>> found all the known gremlins.
>> includeding the @)&# black wire.
>>
>> fixed fuel leak etc etc.
>>
>> so everything should be fine, double checked wiring and hoses.
>>
>> cranks fine
>> gets spark
>> timing is as close as can be gotten static
>> gets fuel.
>> gets compression (new engine)
>>
>> but still no fire........
>>
>> really don't want to use ether. it is sitting on the worktable taunting me
>> but it should fire???
>>
>> frustration is taking hold.
>>
>> somedays I wonder why I phutz with this thing, then I drive it and know why.
>> so I want to drive it.
>>
>> ????? suggestions.  dumb ones probably are the answer.
>>
>> thanks
>> Bob
>>
>>
>> _______________________________________________
>> type2 mailing list
>> type2 at type2.com
>> https://www.type2.com/lists/type2/listinfo
>