[T2] why won't it start

[accessys at smart.net]

1 compression is all between 115-120psi forget which got which but all 
good

2 I have fuel spraying

3 I have spark

maybe old gas, engine spun bearing in Oct so is gas from then.

thanks
Bob




On Tue, 9 Jun 2015, thewestyman wrote:

> Date: Tue, 9 Jun 2015 17:29:58 -0700
> From: thewestyman <zolo at foxinternet.net>
> To: accessys at smart.net, Jamie <jrivers at globalserve.net>
> Cc: type2 at type2.com
> Subject: Re: [T2] why won't it start
> 
> Bob,
>
> 1  What are the figures you got for each cylinder compression?
> 2  Did you check if you have fuel spraying on both sides?
> 3  Do you have spark at all the four cylinders?
>
> Now, if those are good, you are close.  If not, then which one you don't 
> have?
> Zoltan
>
>
> -----Original Message----- From: accessys at smart.net
> Sent: Tuesday, June 09, 2015 4:07 PM
> To: Jamie
> Cc: type2 at type2.com
> Subject: Re: [T2] why won't it start
>
>
> actually moved em both.   both black wires but wrong terminals
>
> got FI working with that.
>
> thanks
> Bob
>
>
> On Tue, 9 Jun 2015, Jamie wrote:
>
>> Date: Tue, 9 Jun 2015 18:53:01 -0400
>> From: Jamie <jrivers at globalserve.net>
>> To: Jamie <jrivers at globalserve.net>, accessys at smart.net
>> Cc: type2 at type2.com
>> Subject: Re: [T2] why won't it start
>> 
>> Bob wrote
>> moved wire on coil that was on wrong terminal (thanks Jamie)
>> 
>> Bob... I wrote you about 2 wrong wires on the coil........ which wire did 
>> you move?
>> 
>> ----- Original Message ----- From: "Jamie"
>>> you can't feed the double relay from the NEG term on the coil.. and you 
>>> can't put power from ignition that formerly went to fan to the NEG 
>>> term....
>> 
>
>
> _______________________________________________
> type2 mailing list
> type2 at type2.com
> https://www.type2.com/lists/type2/listinfo