[T2] VDO Oil pressure sender install

[Scott Busby]

I used grease gun line, it typically has 1/8NPT threads and will need a
fitting to convert to the 10mm of the oil port. You can get a 1/8NTP oil
pressure sensor for the other end. I used a Tee so I could still run the
stock "idiot light" to the instument cluster as well. 1/8NTP and 10mm are
very close so many are tempted to just force the 1/8ntp fitting into the
10mm port on the case, but I do not recommend this.

Scott B
74 Bus