[T2] valve adjustment so it is 1.5 or 2 turns ??

[Jamie]

I think you have to look at it from a valve timing point of view... not just 
how they open.. but when
so.. by adj the amount of "lash" ... you change the valve timing
from a solid pov... if you have 1 thou clearance,, vs 10 thou clearance.. 
the latter will delay the valve timing wrt 1 thou
from a hyd pov... I think it is the same..
Jamie

From: "DurocShark" <durocshark at gmail.com>
>I find this odd. Hydraulics should be dead silent no matter what. If they
> aren't, either they aren't fully pumped up with oil, or they're fully
> extended which is very bad.

> On Sun, Nov 24, 2013 at 11:03 AM, Joe St.Croix <spotop at gmail.com> wrote:
>> when I had a 78 with hyds, I tested the variables and I learned that, 1.5
>> turns is louder and runs cooler, 2 turns is way quiet but runs a little
>> hotter, being in Massachusetts, I went with the 2 turns. If I were in the
>> southwest Id go with the 1.5, my 2 cents