[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: stuck seat



Jacks are real handy for body work too. I bought a 71 Deluxe Clipper for
$300. The only major problem being that the nose was caved in on the drivers
side. I put a piece of plywood over the front of the wheel well then went
the hydraulic jack, 2x4, and a thick, folded up, fiberglass mat on the
inside of the nose (to more evenly distribute the pressure). Slowly I jacked
until. . . . THONK!! The nose popped into position with only a few minor
wrinkles.


>I've been trying off and on for a few days trying to get the front seat
free 
>from its rusted tracks. I sprayed Kroil along the tracks and did a little 
>hammering from time to time with no results. Last night I noticed there 
>seemed to be room between the seat and the metal pedestal back to insert a 
>compact scissors jack  A couple of turns on the scissors jack and the seat 
>slid quietly free. Hope this tactic is of use to someone.
>Eric in Miami
>'73 auto "Tulip"